The Fann Model 212 Combination EP (Extreme Pressure)
and Lubricity Tester is a high-quality instrument designed
to measure the lubricating quality of drilling fluids, provide
data to evaluate the type and quantity of lubricating
additives that may be required, and predict wear rates of
mechanical parts in known fluid systems.
EP tests are performed by applying a measured force with a torque arm to a torque-sensitive, rotating bearing cup. This provides a means of testing lubrication under extreme pressure conditions and produces an indication of the film strength of the fluid being tested
Versatile machine with an ample range of triaxial and hydraulic fracture testing capabilities. Automated tests Delivers unparalleled accuracy and reliability Achieve any desired stress path State of the art Acoustic Emission monitoring system
The graph beside illustrates the wettability transition that is occurring during the phase transition for four synthetic based drilling fluids as they are mixed with an aqueous spacer that contains a popular surfactant package.
The Differential Sticking Tester was designed to determine how likely a given drilling fluid will be to produce a stuck pipe situation and how effective a given drilling fluid treatment or application of spotting fluid in any given drilling fluid would be in reducing this tendency. This measurement is called the Stuck Tendency Coefficient. It takes into account both the stickiness and the cake building capability of the drilling fluid. The Stuck Tendency Coefficient is determined by the Timed Filtrate Test. The unit can be pressurized by the CO2 regulator assembly or from any nitrogen source. If Nitrogen is to be used, the Differential Sticking Tester must be fitted with a suitable Nitrogen regulator, gauges, relief valve, hose and fittings.
Vinci Technologies provides testing tools to investigate operation and performance of new high efficient catalysts capable of CO2 conversion to high added value liquid. Thanks to Vinci Technologies versatile design, accurate catalyst activity investigation can be carried out, to optimize development active and selective catalyst.
The Five-Spindle Multi-Mixer® Model 9B mixer is recommended for use in general purpose mixing of drilling fluids in preparation for laboratory tests of mud materials. Five Spindle Multi-Mixers are supplied with No. 9B29X impeller blades. Each spindle is fitted with a single sine-wave impeller approximately 25 mm in diameter mounted flash side up.
The Model 802P 600oF Roller Oven and the 600oF High Temperature Aging Cell are Fann’s next generation of heat aging test equipment.
