M290 HPHT Consistometer

  • Safely allows the operator to run tests longer than 12 hours
  • Wide LCD touchscreen
  • Linux-based OS with new User Interface for a more userfriendly atmosphere
  • Can be remotely operated using FannOne Software (our latest software development)
Contact Us: 098 2346742
The Model 290 High-Pressure High-Temperature (HPHT) Consistometer is used to evaluate the consistency or pumpability of cement slurries. Operators can determine the maximum available pumping time of cement slurry before it reaches a non-pumpable consistency before setting.

The Model 290 HPHT Consistometer measures the thickening time of cement slurries under simulated downhole pressure and temperature conditions. Its maximum operating conditions are 400degF (204degC) and 30,000 psi (207 MPa). The thickening time of cement slurry is a good indicator of how long the slurry will remain pumpable. Thickening time is the time required for stirred cement slurry to reach a consistency of 100 Bearden units (Bc). The Bearden unit of consistency (Bc) is a dimensionless quantity from 0-100 units. The Bc number corresponds to the torque required to deflect an electrical potentiometer.

Related products

Aqueous Phase Activity Kit

Liên hệ
Read more

The Aqueous Phase Activity Kit is used to determine aqueous-phase activity of emulsified water using an electro hygrometer by the method described in American Petroleum Institute publication API Recommended Practice RP 13B-2. The kit includes special flasks and adapters and premixed saturated salt solutions (relative humidity standards) for use in calibrating the hygrometer

PCM-1000 PROPPANT CONDUCTIVITY METER

Liên hệ
Read more

Proppant pack conductivity with brine and gas Several API cell configuration available ( single ,multi API cell)

DCI- Helium Porosimeter

Liên hệ
Read more

Easily and accurately measure porosity of core samples

Wettability Tester

Liên hệ
Read more

The graph beside illustrates the wettability transition that is occurring during the phase transition for four synthetic based drilling fluids as they are mixed with an aqueous spacer that contains a popular surfactant package.

HAAKE VISCOTESTER IQ PC

Liên hệ
Read more

PCT-PROPPANT CRUSH TESTER

Liên hệ
Read more

Fully automated apparatus Rapid, accurate and reproducible data Precision control improved test consistency and accuracy

Differential Sticking Tester

Liên hệ
Read more

The Differential Sticking Tester was designed to determine how likely a given drilling fluid will be to produce a stuck pipe situation and how effective a given drilling fluid treatment or application of spotting fluid in any given drilling fluid would be in reducing this tendency. This measurement is called the Stuck Tendency Coefficient. It takes into account both the stickiness and the cake building capability of the drilling fluid. The Stuck Tendency Coefficient is determined by the Timed Filtrate Test. The unit can be pressurized by the CO2 regulator assembly or from any nitrogen source. If Nitrogen is to be used, the Differential Sticking Tester must be fitted with a suitable Nitrogen regulator, gauges, relief valve, hose and fittings.

Electrical Stability Meter (EST)

Liên hệ
Read more

Part No. 102130986 — Electrical Stability Tester EST includes: 2 X 9 Volt Batteries, Power Cord, EST Probe with Cable, Calibration Standard, High Range, Calibration Standard, Low Range Optional, Calibration Standard Set