Part No. 210194 – Stirring Fluid Loss Assembly, 230 Volt, 50 Hz
Note: Images of products are provided for illustrative purposes only. The actual product you receive may vary
from the image displayed on this web site.
Stirring Fluid Loss Test
Related products
Liên hệ
The Model 802P 600oF Roller Oven and the 600oF High Temperature Aging Cell are Fann’s next generation of heat aging test equipment.
Liên hệ
Fann density balances are constructed of premium metals for durability, accuracy and ease of use. A high impact plastic case protects the balance during transport and provides a secure base in its working position. A custom spreadsheet is available for recording callibration results. Click "Technical Documents and Materials" on the right.
Liên hệ
Part No. 102130986 — Electrical Stability Tester EST includes: 2 X 9 Volt Batteries, Power Cord, EST Probe with Cable, Calibration Standard, High Range, Calibration Standard, Low Range Optional, Calibration Standard Set
Liên hệ
The Differential Sticking Tester was designed to determine how likely a given drilling fluid will be to produce a stuck pipe situation and how effective a given drilling fluid treatment or application of spotting fluid in any given drilling fluid would be in reducing this tendency. This measurement is called the Stuck Tendency Coefficient. It takes into account both the stickiness and the cake building capability of the drilling fluid. The Stuck Tendency Coefficient is determined by the Timed Filtrate Test. The unit can be pressurized by the CO2 regulator assembly or from any nitrogen source. If Nitrogen is to be used, the Differential Sticking Tester must be fitted with a suitable Nitrogen regulator, gauges, relief valve, hose and fittings.
Liên hệ
Vinci Technologies provides stat of the art testing tools to investigate operation and performance of new high efficient catalysts capable of biomass co-processing to high added value liquid. Thanks to Vinci Technologies versatile design, accurate catalyst activity investigation can be carried out, to optimize development active and selective catalyst.
Liên hệ
The Five-Spindle Multi-Mixer® Model 9B mixer is recommended for use in general purpose mixing of drilling fluids in preparation for laboratory tests of mud materials. Five Spindle Multi-Mixers are supplied with No. 9B29X impeller blades. Each spindle is fitted with a single sine-wave impeller approximately 25 mm in diameter mounted flash side up.
Liên hệ
Ordering Information
Part No. 205814 - Circular Expansion Cement Curing Kit Note: Images of products are provided for illustrative purposes only. The actual product you receive may vary from the image displayed on this web site.